•  

    Click HERE to join our forum and participate in the discussions.

     

Front clip swap


Hunter L

New member
Joined
Sep 19, 2019
Messages
1
Reaction score
0
Points
1
Vehicle Year
1990
Vehicle
Ford Bronco 2
I have a 1990 bronco 2 and would like to swap the front clip to a earlier model with the square lights and separate blinkers any guess on how hard it will be?
 


alwaysFlOoReD

Blang - not bling
Forum Moderator
Joined
Apr 13, 2009
Messages
142
Reaction score
22
Points
18
Location
Red Deer, Canada
Vehicle Year
'91, '93, '98
Vehicle
Various
Engine Size
4.0, 4.0, 4.6
Suspension Style
4wd
Its not that hard. You need the rad support from the same vehicle as your new front end. Unbolt the front clip. Remove grill and all other associated pieces to expose the front rad support. There are a bunch of spot welds that you will need to drill out with a specialized spot weld drill bit. Replace old rad support with new. I used self-tapping screws and they are still holding on my race truck. Replace sheet metal with new.
 

Top