Serving Ford Bronco II Owners & Enthusiasts


Home Discussion Forum Tech Library Articles Forum Member Rides Classifieds Decals Parts Store
Ford Bronco II Discussion Forum  

Go Back   The Bronco II Corral Forums > Bronco II Axles, Steering, Suspension & 4WD Components > Steering


Thread Tools Display Modes
Old 10-26-2018, 07:29 PM   #1
New Member
Join Date: Aug 2018
Posts: 1
Vehicle Year: 1986
Vehicle Make: Ford
Vehicle Model: Bronco 2 XLT
Rep Power: 0
markjv is on a distinguished road
Default SJ FA600 on 4inch lift doesnt fit linkage..

so i have a rough country 4 inch lift on my 86 Bronco 2, and was trying to fix the steering linkage. i decided i wanted to get the super runner one but they have stopped producing them for some reason.. i went ahead and bought the SJ FA600 to drop the linkage down further to straighten it out but have run into the problem of it not being able to hook up properly. i have been through all the forums and different websites but it doesnt seem like anyone has had the problem i have? so the drag link on the passenger side has a bend to connect to the pitman arm right? but the inner tie rod end on the drivers side is just completely straight, and i have to push back the entire linkage in order to get close to having them connect. the problem i run into is that the drag link tie rod end is rubbing with the inner tie rod and there is no clearance. am i doing something wrong? considering NO ONE has had this issue besides me? is there another steering linkage i could buy that has bends on both ends to ensure they dont rub on each other? money isnt an issue here, i just want to finally be done with this awful steering issue..
markjv is offline   Reply With Quote
Forum Notices:


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
hatch doesnt close all the way Bronco II General Discussions 13 09-15-2018 03:42 PM
A4ld Linkage Issue After 3" Body Lift VIguy52 Bronco II General Discussions 0 01-06-2016 05:00 PM
fuel pump works sometimes and doesnt others. richard booth 2.9L Engines 4 09-17-2013 08:01 PM
AL4D linkage and TransferCase linkage MrBroncoII Bronco II & Explorer Specific 0 05-11-2011 08:29 AM
blower motor doesnt come on. no air '89 BII blue thunder Bronco II & Explorer Specific 4 02-04-2011 09:09 PM

All times are GMT -5. The time now is 07:15 AM.

1999-2018 / 959 Media LLC / All Rights Reserved